Excavators

160LC-3

1999 Deere 160LC

1999 Deere 160LC with 4,400 hours. Very nice, clean, tight machine. 70% undercarriage. Tight turntable. Strong hydraulics and tram motors. No leaks. No smoke or blow-by. No cracks or welds. Machine starts, runs and operates very good. 36 inch bucket with manual thumb. Heat and air. All cab glass is intact. Machine is setting in […]

ECR88

2008 Volvo ECR88

2008 Volvo ECR88 Machine has 6,400 hours. 18,000 pound machine. Starts, runs and operates very good. 2 speed travel. Swing boom. Pattern changer. Auxiliary hydraulics with thumb control for a thumb. 70% undercarriage. No leaks. No cracks or welds. No blow-by. Tight turntable. Strong hydraulics and tram motors. Machine travels straight. Full cab with heat […]

Barko

2005 Barko 495ML

2005 Barko 495ML log loader. Machine has 5,700 hours. Pilot controls. Lighting. Machine starts, runs and operates very good. No cracks or welds. No smoke or blow-by. No leaks, except one of the grapple cylinders are seeping a little. Everything works as it should. Comes with delimber and bucksaw. Loader is setting in east VA. […]

140B-3

***SOLD***2003 Volvo EC140B LC With backfill blade.

Very nice, hard find. 2003 Volvo EC140B LC. It has 4,600 hours. Hydraulic thumb, 48 inch bucket. Less than 800 hours on the undercarriage. No smoke or blow-by. No leaks. No cracks or welds. Cab with heat and air. Strong hydraulics and tram motors. Tight turntable. Very nice, clean, tight machine. Priced at $40,900 ***SOLD*** […]

110-2

***SOLD***1998 Deere 110

1998 Deere 110 with 7,700 hours.Machine weights 25,000 pounds. Starts, runs and operates as it should. Tight turntable. Strong hydraulics and tram motors. 90% undercarriage. Back fill blade. 36 inch bucket. No leaks. No smoke or blow-by. Very clean, tight, work ready machine.SOLD!! FOB PA

490

***SOLD***1991 Deere 490

1991 John Deere 490. Machine is showing 4,200 hours. Starts, runs and operates very good. 80% undercarriage. No leaks. No smoke or blow-by. No cracks or welds. Cab with heat. All cab glass is intact. Machine is work ready. Machine is setting in north east PA.

160C-13

***SOLD***2005 Deere 160C LC

2005 Deere 160C LC with 8,800 hours. Machine starts, runs and operates very good. Cab with heat and air. All cab glass intact. 70% undercarriage. Tight turntable. Strong hydraulics and tram motors. No smoke or blow-by. No leaks. No cracks or welds. 36 inch bucket with new teeth. Very good, clean, tight machine. Work ready. […]

210G-10

***SOLD*** 2013 Deere 210G LC

2013 Deere 210G LC with 2014 Ryan’s DS-28 dangle head. Machine has 4,300 hours. Starts, runs and operates very good. 80% undercarriage with single grouser pads. Cab with heat, air and radio. All cab glass intact, except one in the door that we are replacing. Tight turntable. Strong hydraulics and tram motors. No leaks. No […]

EC140B-5

2005 Volvo EC140B LC

2005 Volvo EC140B LC with 6,500 hours. Machine starts, runs and operates very good. Cab with heat and air. All cab glass intact. 36 inch bucket. Quick coupler. Hydraulic thumb. Tight turntable, strong hydraulics and tram motors. No leaks. No cracks or welds. No smoke or blow-by. 30,000 pound machine. Priced at $39,900.

230C-13

2004 Deere 230C LC

2004 Deere 230C LC with 15,800 hours. Machine starts, runs and operates good. Recent undercarriage. Tight turntable. Strong hydraulics and tram motors. No leaks. No smoke or blow-by. No cracks or welds. Dual auxiliary hydraulics. We do have a hydraulic thumb we can install for $2,000 extra. Cab with heat and air. All cab glass […]

350D-2

2006 Deere 350D LC

2006 Deere 350D LC! Machine has 7,100 hours! Very nice, clean, tight machine! No leaks! No cracks or welds! No smoke or blow-by! Long stick! 42″ bucket with quick coupler! Auxiliary hydraulics! 60% undercarriage! Tight turntable! Strong hydraulics and tram motors! Cab with heat, air and radio! All cab glass is intact! Machine is job […]

160C-2

2005 Deere 160C LC

5,800 hours! Machine starts, runs and operates very good! Tight turntable! Strong hydraulics and tram motors! No smoke or blow-by! No leaks! No cracks or welds! 70% undercarriage! 42 inch bucket with heavy duty manual thumb! Bucket does need teeth! Cab with heat and air! We are replacing the front windshield! Work Ready! Priced at […]

312EL-4

2014 Cat 312EL

2014 Cat 312EL with 3,700 hours!Very good undercarriage! Rearview camera! Auxiliary hydraulics! 2 buckets! Quick coupler! No leaks, no cracks or welds, no smoke or blow-by!Machine still has 1 year warranty on hydraulic’s and power train! Very nice, clean, tight machine!Priced at $110,000!

160D-2

2011 Deere 160D LC

6,900 hours! 4 finger hydraulic thumb! 70% undercarriage! Cab with heat and air! All cab glass intact! Pattern changer! All cylinders are dry! Tight turntable! Strong hydraulics and tram motors! No leaks! No cracks or welds! No smoke or blow-by! Machine is work ready! FOB NC! Priced at $70,000!

2000 Cat 312B

2000 Caterpillar 312B with 9,700 hours. Machine starts, runs and operates very good! Cab with heat and air! All cab glass intact! Tight turntable! Strong hydraulics and tram motors! Bucket pins are tight! 36 inch GP bucket with heavy duty manual thumb! No cracks or welds! No smoke or blow-by! 80% undercarriage! Good paint and […]

CX130-5

***SOLD***2007 Case CX130

CX130 with 6,500 hours! Machine starts, runs and operates good. We are installing new undercarriage. We will upload new pictures after we get it installed. Auxiliary hydraulics with hydraulic thumb. Tight turntable. Strong hydraulics and tram motors. No leaks. No cracks or welds. No smoke or blow-by. Machine does have some slack in bucket. Cab […]

325CL

2005 Cat 325CL!

2005 Cat 325CL! 7,500 hours! Machine starts, runs and operates great! $20,000 in complete new single grouser undercarriage!Dual auxiliary hydraulics! 4-way valve at end of stick for grapple or cutter head! Machine does not come with grapple or bucket! It does have bucket cylinder and linkage! No cracks or welds! No smoke or blow-by! No […]

228

2006 Komatsu PC228US LC-3

2006 Komatsu PC228US LC-3!Machine has 11,700 hours. Very good, clean, tight machine. Runs and operates very good. Tight turntable. Strong hydraulics and tram motors. Quick coupler. 42 inch bucket and new manual thumb. Thumb has been installed. No cracks or welds. No smoke or blow-by. No leaks. Machine just came off a job and it’s […]

2006 Cat 315CL

2006 Cat 315CL! Machine has 6,100 hours! Aux. Hyd. 70 to 80% Undercarriage! Tight turntable! Strong Hyd. and tram motors! No cracks or welds! No leaks! No smoke or blow-by! Cab with falling objects guard! Heat and air! Very good, work ready machine! Machine does not come with hammer! It will have a 36″ bucket! […]

1998 Deere 120

1998 Deere 120! 5,900 hours! Machine runs and operates very good! New swing motor! Does have some dents and dings. Strong hydraulics and tram motors! No leaks! No smoke or blow-by! No cracks or welds! 80% Undercarriage! Priced at $32,500!

315L-8

1996 Cat 315L ***SOLD***

1996 Cat 315L! ***REDUCED*** Machine shows 2,900 hours, but not believed to be correct! Appears to be a 8,000 hour machine! Cat turbo diesel engine at 100 HP! Turntable is tight! Hydraulics and tram motors are very strong! No leaks! All hydraulic cylinders are dry! Track pads are 27.5 inches and overall width is 8′ […]

1998 Cat 312B ***SOLD***

1998 Cat 312B with 7,100 Hours! Machine has new right front idler and track adjuster! Undercarriage is 90%! I have installed a new turbo and new injectors! Caterpillar just did a valve adjustment! It starts very easy and runs good! The hydraulics and tram motors are very strong! No cracks or welds in the boom […]

EX700

1996 Hitachi EX700H

1996 Hitachi EX700H With 9,400 Hours! Machine runs and operates as it should! 59″ Bucket, 29.5″ Pads! 50% Undercarriage! No cracks or welds! Tight Turntable! Aux. Hyd. Priced at $65,000!  

320CL-7

2006 Cat 320CL

2006 Cat 320CL With 8,000 Hours! Machine runs and operates very good! New 42″ Bucket! No leaks or welds! Tight turntable! Strong hydraulics and tram motors! Undercarriage 80% with single grouser pads! Work ready machine! REDUCED TO $57,000!

Deere 200D-2

2010 Deere 200D

2010 Deere 200D With 7,500 Hours! Machine runs and operates great! No leaks or welds! No smoke or blow-by! Tight turntable! Strong Hydraulics and Tram motors! 80% Undercarriage! 42″ Bucket, Aux. Hyd. and Quick Coupler! Machine is work ready! Priced at $67,000!  

to top button